Comp.software-eng FAQ (Part 0): periodic postings and archives
This is a discussion on Comp.software-eng FAQ (Part 0): periodic postings and archives within the Tech FAQ forums, part of the Interviews and Job Listings category; Last-Modified: 10 Nov 2002 Archive-name: software-eng/part0 URL: http://www.cs.queensu.ca/FAQs/SE/ Welcome to ...
|
|||||||
| Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
04-18-2004, 05:15 AM
|
|||
|
|||
|
Comp.software-eng FAQ (Part 0): periodic postings and archives
Last-Modified: 10 Nov 2002
Archive-name: software-eng/part0 URL: http://www.cs.queensu.ca/FAQs/SE/ Welcome to comp.software-eng, a newsgroup for discussion of software engineering and related topics. This message is followed by four others, each summarizing a set of "frequently asked questions" (FAQs): Comp.software-eng FAQ (Part 1): questions and answers Comp.software-eng FAQ (Part 2): CASE tools summary Comp.software-eng FAQ (Part 3): readings Comp.software-eng FAQ (Part 4): CASE tool vendors Be warned: the only mechanism we use to compose these lists is to gather information submitted by people around the net, post it regularly, and incorporate feedback. All evaluations are the opinions of those who submitted them; your mileage may vary. Send comments to dalamb@spamcop.net (David Alex Lamb). Many FAQs, including this one, are available on the archive site rtfm.mit.edu in the directory pub/usenet/news.answers. The name under which a FAQ is archived appears in the Archive-name line at the top of the article. This FAQ, and the parts that follow, are archived as software-eng/part0 through software-eng/part4. You can search through past comp.software-eng articles, and those of other newsgroups, via DejaNews at http://www.dejanews.com/. ------------------------------------------------------------------------ Subject: World-Wide Web archives Date: Wed May 24 08:22:43 1995 The information in the FAQs and the comp.software-eng archives is available through the World-Wide Web at <URL:http://www.cs.queensu.ca/FAQs/SE/> and also <URL:http://www.cs.queensu.ca/Software-Engineering/> Everything visible through the Web is also available via FTP; the above URL leads to the same directory as you get via anonymous FTP to <URL:ftp://ftp.cs.queensu.ca/pub/software-eng/www/> ------------------------------------------------------------------------ Subject: Other Web sites Date: 10 Nov 2002 The following are other Web sites related to software engineering: A. Tools 1. Brad Myers (Brad.Myers@cs.cmu.edu) maintains a list of user interface software tools at http://www.cs.cmu.edu/afs/cs.cmu.edu...toolnames.html. 2. CERA Research's EE Toolbox for embedded systems at http://www.cera2.com/ebox.htm. 3. Simon Stobart's list of freeware and shareware CASE tools for IBM PCs running MS Windows at http://osiris.sunderland.ac.uk/sst/casehome.html. 4. Applied Information Science International runs a forum on data modeling and other forms of abstract data representation. It includes discussions of methodologies, reviews of CASE products, users' reports of their experiences in actual design projects, and references to other sources via WWW links and a bibliography of printed material. 5. info-partners international, inc. maintains a Software Information Center, at http://www.info-partners.com/softinfo/ with (as of June 1997) information on over 15,000 software products and their vendors. 6. Brian Marick (marick@testing.com) maintains a list of testing tools suppliers. 7. The page describing the Lucent Software Toolchest CD-ROM (including CSCOPE). 8. The University of Sunderland's page on Meta-CASE systems at http://osiris.sunderland.ac.uk/rif/m...case.home.html. 9. The Software Deployment Information Clearinghouse at http://www.cs.colorado.edu/~rickhall/deployment/ describes tools for packaging, releasing, installing, configuring, updating, and uninstalling a software system. B. Standards 1. The IEEE has an online catalog of its hardcopy standards for software engineering at http://stdsbbs.ieee.org/products/catalog/it.html#gen23. 2. Software development and documentation standards are available, for a fee, from IEEE. These supersede earlier standars such as MIL-STD-498 and DOD Standard 2167A. 3. Praxion provides some ISO 9000-3 Guidelines in Plain English. C. FAQs 1. Pete Phillips' project management FAQ at http://www.faqs.org/faqs/proj- plan-faq/. 2. David W. Eaton's configuration management and problem tracking FAQs at http://www.iac.honeywell.com/Pub/Tech/CM/. 3. The comp.object (Object Orientation) FAQ at http://www.cyberdyne-object- sys.com/oofaq2/. 4. Software Testing Laboratories, Inc. maintains a web page on creating high quality software products for the commercial marketplace at http://www.stlabs.com/default.htm. 5. The Configuration Management Yellow Pages contains many links to online CM resources. 6. Rick Hower's Software QA and Testing Resource Center. D. Newsletters and E-Mail 1. Bill Frakes edits the Software Reuse and Re-engineering newsletter at http://frakes.cs.vt.edu/renews.html. 2. Software Research, Inc. archives its monthly Testing Techniques Newsletter (TTN) at http://www.soft.com/News/TTN-Online/. 3. The SEWORLD mailing list (seworld@cs.colorado.edu). E. Education 1. David Eichmann's list of educational programs has vanished. 2. The Canadian Information Processing Society's draft software engineering curriculum. F. Other 1. ACM SIGSOFT's list of Software Engineering conferences, most of them sponsored by or in cooperation with SIGSOFT. 2. The software engineering entry of the WWW Virtual Library, at http://www.w3.org/hypertext/DataSour.../Overview.html. 3. The ASSET public software reuse library at http://source.asset.com/; start by reading their FAQ at http://source.asset.com/WSRD/faq.html, then their Worldwide Software Resources Discovery (WSRD) catalog at http://source.asset.com/WSRD/catalog.html. 4. Philip Johnson's archive on formal technical review at http://www.ics.hawaii.edu/~johnson/FTR/. 5. Charles McCann's (cmccann@okway.okstate.edu) Capability Maturity Model Level 2 Focus Group at http://www.okstate.edu/~cmccann/. 6. Marko Krajnc's page on component technology at http://www.odateam.com/cop/. 7. Manfred Schneider's "Cetus Links" on object orientation at http://www.rhein-neckar.de/~cetus/software.html. 8. Robin Whitty's bibliography on object-oriented metrics at http://www.sbu.ac.uk/~csse/publications/OOMetrics.html. 9. The Personal Software Process (PSP) resources page at http://wwwipd.ira.uka.de/PSP/ at theUniversity of Karlsruhe. 10. The Process Patterns Resource Page at http://www.ambysoft.com/processPatternsPage.html. ------------------------------------------------------------------------ Subject: other newsgroups Date: 28 Oct 1994 The following other newsgroups discuss topics related to software engineering; consequently, coverage of these topics in this newsgroup (and thus the comp.software-eng archives) tends to be sparse. Many of these groups have their own FAQ's, which you can find in the appropriate *.answers group (e.g. comp.answers for any group whose name starts with "comp."). comp.groupware Software/hardware for shared interactive environments comp.human-factors Human factors, including user interfaces comp.lang.* Discussion of specific programming languages. comp.newprod Announcements of new products comp.object Object-oriented analysis/design/programming/systems comp.programming Programming, especially algorithms and data structures comp.realtime Computer-based realtime systems comp.software.measurement Software metrics comp.software.testing Software testing comp.software.config-mgmt Configuration management and problem tracking comp.specification.misc Formal specification methods comp.specification.larch The Larch family of specification notations comp.specification.z The Z formal specification notation comp.sw.components Reusable software components ------------------------------------------------------------------------ Subject: comp.software-eng archives Date: 29 Oct 1994 The following files are available via anonymous FTP from ftp://ftp.cs.queensu.ca/pub/software-eng/archive Log in with user ID 'anonymous' and use your mailing address as the password. Each file has a header (in e-mail or news format) that credits the original collector. Readings 26 Jan 1993 ada: bibliography on Ada and software engineering 13 May 1992 aiswe: readings: artificial intelligence and soft.eng. 7 Jul 1992 fault: Fault Tolerance references 13 Feb 1992 readcase: Bibliography on CASE 22 May 1992 reflist: Tero Ahtee's software engineering reference list 15 Feb 1992 statecharts: Reference list on Harel's statecharts 10 Apr 1992 verification: References on program verifier design Book reviews 27 Mar 1992 reviewJapanSoftFactory.html: Michael A. Cusumano: "Japanese Software Factories" 31 Mar 1992 reviewFowlerRifkin.html: Priscilla Fowler and Stan Rifkin: "Software Engineering Process Group Guide" 31 Mar 1992 reviewMarksTesting.html: David M. Marks "Testing Very Big Systems" 29 Oct 1994 reviewNeumannRisks.html: Peter G. Neumann's "Computer-Related Risks" 31 Mar 1992 reviewOuldTesting.html: Ould and Unwin's "Testing in Software Development" 31 Mar 1992 reviewWeinbergQuality.html: Gerald M. Weinberg's "Quality Software Management - Volume 1: Systems Thinking" Tools 2 Oct 1991 CASEexp: experience with CASE tools 31 Jul 1993 cmtools: Configuration management tools 31 Jul 1993 diagramedit: Diagram editors and tools for building them 7 Jul 1992 pdcase: Public-domain CASE tools 26 Mar 1993 performance: performance analysis tools 7 Jul 1992 petri: Petri net tools 30 Jul 1993 pmtools: Project management and design tools 13 Apr 1992 probtrack: Problem tracking tools 7 Jul 1992 restruct: Tools for restructuring and reverse engineering 21 Oct 1991 statsTool: X-based statistics and graphing packages 30 Jul 1993 syslevel: Realtime/hardware system-level CASE tools 31 Jul 1993 testTools: Tools for testing 15 Feb 1992 transynth: Transformation/synthesis systems 3 Aug 1993 uims: User Interface Management Systems Uncatalogued topics 31 Jul 1993 2167a: DoD-Std-2167a and life cycle models 31 Jul 1993 anecdote: Anecdotes/stories about software engineering 10 Sep 1991 bachman: Bachman information modeling 9 Jul 1993 bookTOC: Tables of contents of books 31 Jul 1993 cdif: CASE Data Interchange Format 30 Jul 1993 cleanroom: Cleanroom software development 4 Jun 1992 color: Ergonomics of color displays 31 Jul 1993 concur: Concurrent Engineering 28 Feb 1992 cubicle: Productivity effect of offices vs. cubicles 26 Mar 1993 defect: Defect tracking 7 Jul 1992 designchange: Effect of design changes 30 Jul 1993 education: Software Engineering education and degree programs 15 May 1992 environment: Software Engineering environments 11 Dec 1992 ethics: ACM code of ethics 18 Sep 1991 facet: Faceted classification and multiple inheritance 29 Oct 1994 FDA.html: Food and Drug Administration and Software 31 Jul 1993 formal: formal methods in the USA 10 Apr 1992 funcpoints: function/feature points 2 Oct 1991 hood: Hierachical Object-Oriented Design 31 Jul 1993 horror: Computer horror stories 7 Apr 1995 hungarian: papers on Hungarian notation 2 Oct 1991 ieee: IEEE software engineering standards 30 Jul 1993 inspect: Code inspection techniques 31 Jul 1993 knowuser: Discussion on whether to ``know the user'' 31 Jul 1993 lotos: Language of Temporal Ordering of Specifications 9 Apr 1992 maint: Software maintenance laws 6 Mar 1992 manuals: Guidelines for software manuals 31 Jul 1993 maturity: SEI Capability Maturity Model 30 Jul 1993 oodb: Object-oriented databases 10 Jan 1992 ooformat: Format for object-oriented design documents 10 Apr 1992 oomaint: maintenance and complexity in o-o systems 31 Jul 1993 oomethod: Object-oriented methodologies 30 Jul 1993 portableC: writing portable C code 18 Sep 1991 productivity: Feature point productivity for several countries 7 Jul 1992 proto: Prototyping 15 Feb 1992 readintro: Introducing your manager/customer to SE ideas 15 Feb 1992 realtime: Information on realtime software development 31 Jul 1993 reqelicit: Requirement Elicitation 31 Jul 1993 reuse: Discussion of software re-use. 31 Jul 1993 safety: Formal methods and software safety 31 Jul 1993 SEorigin: Origin of term ``software engineering'' 15 Feb 1992 specmark: SPEC modern architecture benchmarks 10 Jan 1992 spiral: References on Spiral life-cycle model 31 Jul 1993 standards: standards relevant to software engineering 23 Jun 1997 static.html: Software metrics and static analysis 31 Jul 1993 strucAD: Stuctured analysis and design and SADT 10 Apr 1992 techTransfer: Technology transfer 31 Jul 1993 testing: Discussion of testing (and inspection) 31 Jul 1993 vdm-z: formal methods Z and VDM ------------------------------------------------------------------------ Subject: more detailed information on specific products The following files are in the "blurb" subdirectory of the software engineering archives at cs.queensu.ca; retrieve them as described for the main archives, except that for the mail archive server you say send software-eng/blurb f1 f2 .... The files consist of comments on individual products or companies. When a vendor sends me detailed information on a product that won't fit into the FAQ, I put it here - along with other comments from the net. Books 22 Oct 1994 ooexample: Berard Software Engineering's "A Complete Object- Oriented Design Example" 22 Oct 1994 ooproj: Berard Software Engineering's "A Project Management Handbook for Object-Oriented Software Development" 4 Nov 1994 FKNprocess.html: Finkelstein et al.'s Software Process Modelling and Technology 31 Jul 1993 jaloteSEtext: P.Jalote's "An Integrated Approach to Software Engineering" 7 Apr 1995 safeware.html: Nancy Leveson's "Safeware: System Safety and Computers" 31 Jul 1993 schach2e: Schach's "Basic Software Engineering" text Discussion of tools 31 Jul 1993 cvs: CVS version management tool 31 Jul 1993 ief: TI Information Engineering Facility (IEF) 31 Jul 1993 PCTE-ATIS-CAIS: Discussion of PCTE vs ATIS vs CAIS 29 Oct 1994 ooadTools.html: Evaluation of OO Analysis and Design Tools 31 Jul 1993 rcs: RCS version control system 31 Jul 1993 rdd-100: RDD-100 Requirements Driven Developer 31 Jul 1993 stp-teamwork: Comparison of Software Thru Pictures and Cadre Teamwork Submissions from vendors 31 Jul 1993 aegis: AEGIS project change supervisor 31 Jul 1993 autoplan: AUTOPLAN project scheduling tool 27 Oct 1994 cmvc: IBM Configuration Management Version Control (CMVC) 27 Oct 1994 CMZ: CMZ source code management system 5 May 1995 continuus.html: Continuus configuration management and problem tracking 27 Oct 1994 DDTS: Distributed Defect Tracking System (QualTrak) 31 Jul 1993 FIELD: Brown University FIELD environment 31 Jul 1993 IFAD: IFAD VDM-SL toolbox 27 Oct 1994 LDRA: LDRA testbed 8 Dec 1994 MacAnalyst.html: Excel Software's MacAnalyst and MacDesigner tools 31 Jul 1993 parcplace: ParcPlace Smalltalk and C++ tools 31 Jul 1993 PurePulse: Pure Pulse software newsletter 31 Jul 1993 rational: Rational Inc. Ada environment, Rose OOD tool 31 Jul 1993 shapetools: shapetools version management/make-like tool 31 Jul 1993 specbox: SpecBox VDM support tool 31 Jul 1993 telelogic: Telelogic Environment for CCITT SDL 4 Nov 1994 Vantive.html: Vantive Qualtity problem tracking system 13 Jul 1995 verilog.html: Verilog home page -- "Yo' ideas need to be thinked befo' they are say'd" - Ian Lamb, age 3.5 http://www.cs.queensu.ca/~dalamb/ qucis->cs to reply (it's a long story...)     
|
|
04-18-2004, 05:15 AM
|
|||
|
|||
|
Comp.software-eng FAQ (Part 2): CASE tools summary
Last-Modified: 13 Oct 2002
Archive-name: software-eng/part2 URL: http://www.cs.queensu.ca/FAQs/SE/case.html This is the monthly "frequently asked questions" (FAQ) posting on Computer-Aided Software Engineering (CASE) tools: ECMA Reference Model Other sources of information Configuration management and problem tracking tools CASE tools for object-oriented design and analysis CASE tools for educational use Look for lines starting with "Subject:" (control-G command in rn). Most products are trademarks or registered trademarks of their vendors. Send comments to dalamb@spamcop.net (David Alex Lamb). ------------------------------------------------------------------------ Subject: ECMA Reference Model Date: 8 Jul 1996 Originally collected by: ant@hpfcbig.SDE.HP.COM (Anthony Earl) The European Computer Manufacturer's Association (ECMA) adopted TR/55, "Reference Model for Frameworks of Software Engineering Environments", 2nd edition, in December of 1991; NIST and ECMA produced a revision in August 1993. In Europe, it's available for free from The European Computer Manufacturers Association 114 Rue du Rhone CH-1204 Geneva Switzerland Tel: +41 22 735 36 34 Fax: +41 22 786 52 31 In the United States, it is for sale by the National Institute of Standards and Technology as NIST Special Publication 500-211, and also via anonymous FTP to site nemo.ncsl.nist.gov as pub/isee/publications/sp.500-211.ps.Z. Contact: the Superintendent of Documents, US Government Printing Office, Washington DC 20402. There is a reference model of end-user services for software engineering environments (e.g., requirements, design, code, test, tracing, planning, publications, plus about 50 others) called the Project Support Environment Reference Model that was developed by the PSESWG (Project Support Environment Standards Working Group). It is also a NIST special publication, SSP 500-213, and is also available via anonymous FTP to site nemo.ncsl.nist.gov as pub/isee/publications/sp.500-213.ps.Z. ------------------------------------------------------------------------ Subject: Other sources of information Date: 8 Apr 1995 Brad Myers (Brad.Myers@cs.cmu.edu) maintains a list of user interface software tools (available using the World-Wide Web via URL http://www.cs.cmu.edu/afs/cs.cmu.edu...oolnames.html), which are tools that can help to create the user interface part of the software. There is a Hypercard stack that you can get by anonymous FTP from the info- mac/card directory at sumex-aim.stanford.edu. The version 1.1 runs under various Hypercard versions including 2.0v2 on newer Macs: -rw-r--r-- 1 macmod 286168 Jan 29 12:13 case-products-11.hqx A short companion report (about 60 pp. including tool signal info and my view of why and where this market is going) can be obtained from GMD; Western US office is: GMD, 1942 University Ave. #207, Berkeley CA 94704.) Heinz W. Schmidt hws@icsi.berkeley.edu [edsr!bigdaddy!cdm@uunet.UU.NET (Clifford D. Morrison) did a search with Archie and points out that this file isn't available at sumex anymore; possible locations follow. A file with a .Z ending usually means you need to retrieve it in binary/image mode and run it through UNIX 'uncompress': Host wuarhive.wustl.edu (128.252.135.4) Location: /mirrors2/info-mac/Old/card FILE rw-r--r-- 248003 Jun 30 1991 case-products-11.hqx.Z Host utsun.s.u-tokyo.ac.jp (133.11.11.11) Location: /Mac/info-mac/card FILE rw-rw-r-- 286168 Feb 12 10:39 case-products-11.hqx See also the Mar. 1, 1992 issue of Datamation. There are over 400 products listed for different purposes and platforms. Entries in the listing describe Company, Product, Product Type, and Operating System. Some of the product types are: Structured Analysis, Planning and Design, Strategic Planning, Analysis and Design, User Interface Konstruction, DBMS Design, Design, Prototyping, Project Management, Verification, Validation, (Data) Modeling, Simulation , Diagramming, Methodology, Software Metrics and Static Analysis, Configuration and Release Management, Project Management, Maintenance, Code Generation, Restructuring and Reverse Engineering, Performance, Testing. (sprinzl@edvz.tuwien.ac.at) ------------------------------------------------------------------------ Subject: Configuration management and problem tracking tools Date: 8 Apr 1995 This FAQ used to contain information on configuration management and problem tracking tools. With the advent of newsgroup comp.software.config-mgmt, it's more appropriate to go looking in its FAQs (available using the World-Wide Web via URL http://www.iac.honeywell.com/Pub/Tech/CM/). ------------------------------------------------------------------------ Subject: CASE tools for object-oriented design and analysis Date: 4 Jun 2002 Originally collected by: calvo@nssdca.gsfc.nasa.gov (Sherri Calvo) Berard Object & Class Specifier (BOCS) by Berard Software Engineering (see vendor list). BOCS is an object-oriented analysis and design CASE tool for developing models of software & business systems and their underlying objects (classes, parameterized classes, and instances of classes). BOCS is used to create programming language independant specifications, then automatically generate formatted documentation combining text and graphics into popular publishing packages. BOCS also provides code generation for C++ and Smalltalk. The traceability tool allows users to trace requirements to design and code. BOCS runs on Microsoft Windows 3.1 (TM). $595 per copy. - [russ@bse.com (Russell Hopler)] Bridgepoint by Project Technology, Inc. (see vendor list). The BridgePoint tool suite is an integrated set of automation tools specifically designed to support the Shlaer-Mellor Method of Object- Oriented Analysis and Recursive Design through a detailed understanding of the underlying formalism. The Model Builder allows easy capture of a complete set of integrated Shlaer-Mellor OOA models. The Model Verifier increases final system quality through simulated execution with model debugging, completeness audits, model interpretation, controlled execution rates and execution logging. The Generator reduces hand-coding and enables design reuse through a pattern-based capture of system design and automatic code generation from OOA models. - [text supplied by vendor] Cadre Teamwork (see http://www.cs.queensu.ca/Software- Engineering/blurb/cadre.html) by Cadre Technologies, Inc (see vendor list). Associated with Project Technology. ObjectTeam for Shlaer/Mellor, Rumbaugh. Ada structure graphs (Booch/Buhr). CASET . 714-496-8670 IPSYS ToolBuilder Clyder by Sema Group (see vendor list). An object-oriented requirements engineering method, trying to combine rigour and usability. Main characteristics: few notations, native object- orientedness, ability to range from informal but structured specifications to fully formal ones, formal semantics, sophisticated semantic checks, etc. Demo Windows tool at http://osiris.sunderland.ac.uk/sst/case/clyder20.zip. GDpro by Advanced Software Technologies, Inc. (see vendor list). (Formerly Graphical Designer) UML visual modeling tool for collaborative development of Java, EJB, C++ and IDL code. Features include: markerless round-trip engineering; inter-model synchronization; Web system reports; VBA customization; best-of-breed lifecycle tool integrations; and Rose import. Download a full-featured free evaluation copy at http://www.gdpro.com/ - [Monica Clancy <mclancy@advancedsw.com>] HOW by Riverton Software (see vendor list). A component modeling tool and deployment framework for building business applications in Visual Basic, Java, or PowerBuilder. ICONIX PowerTools by ICONIX Software Engineering Inc. (see vendor list). A suite of ten integrated multi-user analysis and design tools for Object- Oriented and Structured development. The company also offers an interactive CD-ROM training course in O-O methods. Ideogramic UML (see http://www.ideogramic.com/products) by Ideogramic (see vendor list). A UML CASE tool with traditional features, e.g. the most important diagram types, XMI, printing, and reverse engineering, but with a user interface based on a quite different interaction principle: Instead of tool bars and menus, it uses gestural interaction somewhat like the way letters are drawn on a Palm Pilot. This makes it really easy and efficient to use, and uniquely also allows for use on a large electronic whiteboard and on Tablet PC's. - [text supplied by vendor] iUML (see http://www.kc.com/html/products/iuml/iuml.html) by Kennedy Carter Ltd. (see vendor list). Allows users to construct, execute and generate code from UML models. Runs on Windows and Unix. MetaEdit by MetaCase Consulting OY (see vendor list). A metaCASE tool that supports most available Object-Oriented, structured and Business Process Re-engineering methods. It generates Smalltalk and C++ as well as Java, Delphi and SQL. With the MetaEdit Method Workbench method support and code generation can be extended. A variety of platforms are supported. Educational licenses can also be obtained. Methods Workbench by ISDE Metasoft Ltd. (see vendor list). Formerly known as Virtual Software Factory (VSF). A meta-CASE configurable tool incorporating a KBS. Object Domain by Dirk Vermeersch (see vendor list). A shareware object-oriented analysis and design CASE tool for Windows 3.1. It is a full implementation of the Booch notation (from Object Oriented Analysis and Design with applications, second edition. by Grady Booch). All six diagrams (class, object, module, state, process, and interaction) can be entered in this tool. C++ stubs and module hierarchy can be generated from the diagrams. Available via anonymous FTP to site oak.oakland.edu as /SimTel/win3/pgmtools/domain.zip ObjecTime Developer (see http://www.objectime.com/) by ObjecTime Ltd. (see vendor list). ObjecTime Developer enables software developers to build applications using component-based visual design models. TotalCode (tm) application generation automatically generates complete C and C++ executables for UNIX, NT and a variety of real-time operating systems directly from system or component models. Application generation of fully or partially complete designs, plus animated visual and symbolic debuggers, encourage early and continuous design refinement and validation. - [text supplied by vendor] ObjectMaker (a/k/a Adagen) by Mark V Systems, Ltd. (see vendor list). Runs under Windows, X11, VMS (Mac under development). Support for OMT (Rumbaugh et al), Booch, Coad-Yourdon, and other object-oriented and structured methods. Tailorable for new (and combinations of existing) methods. Code generation and reverse engineering for Ada, C/C++ (others planned). Generation of diagrams from the repository. Support for process modeling notations. Interoperation with other tools via DDE, OLE, TCP/IP, etc. - [dwig@markv.com (Don Dwiggins)] Objectory Support Environment by Objectory Corporation (see vendor list). A configurable object-oriented analysis and design tool for large teams. Supports analysis and design activities according to Jacobson`s use case driven development approach (Object-Oriented Software Engineering - A use case driven approach, by Jacobson et al, published by Addison-Wesley 1992.). Team support through central repository, and can also be integrated with Configuration Management tools. Generates C++, Smalltalk, Corba/IDL and more. Available for Windows, Windows NT, OS/2, SunOS, Solaris, AIX, HP- UX. Current version (as of January 1995) is 3.5, with 3.6 due on June 15, 1995. OMW/Kappa by IntelliCorp (see vendor list). An O-O development environment for client/server applications, based on the Martin/Odell methodology. OOAtool by Object International, Inc. (see vendor list). Runs under Windows, Mac, and X11. Supports methodology in Peter Coad's books "Object-Oriented Analysis" and "Object-Oriented Design". OOTher . (OO Documentation Tool); once called OoaToolFree Rel 1.06f (for win 3.1). Supports Coad's OOA/OOD, Jacobson OOSE (parts) and Finite State Machine notation (a subset of SDL) and C++ header file generation. Free for Students, $70 home users, $170 site licese for 5 users for others. e-mail: konziel@eua.ericsson.se. Archived by Simon Stobart at http://osiris.sunderland.ac.uk/sst/case/oot-106f.zip. Paradigm Plus by Platinum Technology, Inc. (see vendor list). An object-oriented analysis and design tool that supports Enterprise Component Modeling (ECM), code generation, and reverse engineering. Supports all leading OO methods, incorporates a distributed object repository for large teams of concurrent users, and automaticly synchronizes models, source code, and documentation. Available on most PC and UNIX platforms. Paradigm Plus / EVB Edition by EVB Software Engineering, Inc. (see vendor list). Supports the EVB Ada Object Oriented Development (AOOD) methodology. Can be configured to support other methods. Has Ada code generation. ProxyDesigner (see http://www.proxysource.com/home.asp?...yDesigner.html) by Proxysource.com (see vendor list). ProxyDesigner is a free PC-based, UML design tool with an easy to learn and use user interface, support for full hard-copy print-outs of designs, and extensive built-in formatting, alignment, and layout functions. ProxyDesigner allows developers to graphically create complex UML software designs, patterns, and architectures. Completed or in-process designs to be published to the web, where users can share and discuss their designs with other developers on-line. - [text supplied by vendor] Rational Rose by Rational (see vendor list). Supports Booch methodology. Available for SunOS, AIX, MS Windows, OS/2. StP Product Family by Aonix (see vendor list). The Aonix StP product family consists of a component-based modeling approach for OO and Structured Modeling. Training is available for all products on- site or off-site. The family includes the following products: StP/UML - for UML-based, Object-Oriented development; StP/SE - for Structured Environments methods, including DeMarco and Yourdon; StP/IM - for Information Modeling methods, including Bachman and Chen. System Architect by Popkin Software & Systems (see vendor list). Supports ER diagrams, Booch methodology for Ada and C++, Coad/Yourdon. Diagram editor checks for consistency and rule violations. Runs under MS- Windows. Unirel Openlook Toolkit by Unirel (see vendor list). An Eiffel wrapper for Xlib. US $2000 WinA&D/Mac&D by Excel Software (see vendor list). Supports UML, along with system analysis, software design and code generation; integrates with HTML documents. With Class by MicroGold Software Inc. (see vendor list). A Case Tool for Windows 3.1, 95/NT that supports UML, Booch, Rumbaugh, Shlaer-Mellor and Coad-Yourdon. It reverse engineers C++, Java, Visual Basic, and Delphi. It can generate most OO languages through its scripting capabilities, can reverse engineer relational databases and can OLE paste into Word and other OLE compatible documents. Some diagram editors support drawing conventions of various OO methodologies. They typically don't have facilities that depend on the semantics of the diagram, such as checking and code generation, but may have other virtues. Robochart (see http://www.csn.net/digins/) by Digital Insight (see vendor list). Interactive diagram editor for OPEN LOOK & Motif ($850); Does hierarchical ERDs, dataflows, etc. Educational discounts. Free evaluation copy via web page or via anonymous FTP to site ftp.csn.org as digins. SDDGen by Trident Systems Inc. (see vendor list). SDDGen is a graphical design tool for capturing, organizing and communicating software design information. SDDGen allows the software designer to select (or create) a design style, including several varieties of OO; create language-independent schematics of his/her software design, including annotations and (if desired) compile-ready code; and produce multiple products from the design, including formal design reports, slide presentations, and code outlines. A templating language supports the creation of additional design products, while a design library allows reuse of design information from project to project. Multi-user features allow configuration control during multiple simultaneous design sessions. SDDGen runs on Solaris, SunOS, HP/UX, and Irix. A single node, multi-user license costs $1,195.00. - [mike@tridsys.com (Mike Casey)] Visual Thought by Confluent, Inc. (see vendor list). A multipurpose UNIX diagramming & flowcharting tool supporting various software diagramming notations (including Booch, Rumbaugh, HP Fusion, Jacobson's Use Case, ER), as well as mixed and custom notations. It also draws general diagrams, including flowcharts (with all standard flowchart shapes), network diagrams, and circuit/logic diagrams for presentation and documentation graphics. Confluent offers a free evaluation CD-ROM; see http://www.confluent.com/vt-offer.html. ------------------------------------------------------------------------ Subject: CASE tools for educational use Date: 3 Mar 1997 Originally collected by: render@zeppo.colorado.edu (Hal Render) Teamwork by Cadre Technologies, Inc (see vendor list). It runs on SUN, ULTRIX, VMS, HP, APOLLO, OS2, etc, with X window support on most of the platforms with more to come soon (including some low-cost PC X emulators. [from cadreri!sat@Sun.COM (Scott A. Trachtenberg)] We have been using for the past few years the following two tools: (Schemacode International Inc (see vendor list)) SCHEMACODE: automatically translates schematic pseudocode design into source code. Works for most programming language except ADA. Available on PC, soon on UNIX. Educational licence 250$ + 50$ per PC. IEEE Computer had a good report on this tool. Sometime last fall. DATRIX: a tool for software quality assessment on PC and UNIX machines. Works for C, FORTRAN and PASCAL. Measures up to 40 metrics and provides a unique representation of the control flow, which is useful for testing, program understanding, and program evaluation. Expensive; educational licence for 500$, including up to 10 workstations. We have been using these tools for the past three years in 4th year undergrad and grad soft.eng. courses Ecole Polytechnique in Montreal. [from robillar@rgl.polymtl.ca (P. N. Robillard)] ToolBuilder (formerly TBK) by IPSYS Software Plc (see vendor list). It provides meta-tools (design editors, structure editors) a single underlying ERA database (supporting fine structure) and a uniform UI based on Motif. Tools exist for HOOD (design for Ada). Might have educational discounts. STONE by FZI (see vendor list). (see also archives file "environments") - An SEE for research and education. An OODBS called OBST is used as the core of the environment. OBST is available via anonymous ftp from gate.fzi.de [141.21.4.3]. OBST provides currently an interface to C++. A call interfaces to C is also available, as well as an embedding of OBST into the interactive tool command language TCL. [from Bernhard Schiefer <schiefer@fzi.de>] Rational Environment by Rational (see vendor list). A tightly integrated, interactive software engineering environment for total lifecycle control of Ada projects. Supports design, development, unit test, maintenance, verification, document generation, configuration management, subsystem tools, incremental compilation. Can also integrate with external front-end CASE tools and external target compilers. [from: Bob Geiger <rjg@gator.Rational.COM>] Objectory by Objective Systems (see vendor list). An object-oriented Analysis and Design method with supporting CASE-tool. The tool is a multi-user tool with a central repository and includes multiple diagram and documentation techniques, consistency checks, traceability, etc. It covers several models including Requirements, Analysis and Design models and also C++ code generation. The tool runs on multiple platforms. An overview of Objectory can be found in "Object-Oriented Software Engineering - A use case driven approach", by Jacobson et al, published by Addison-Wesley 1992. OOD (see http://www.cs.queensu.ca/Software-En...blurb/OOD.html) by Prof. Taegyun Kim of Pusan University in South Korea. A free tool for educational use, based on Rumbaugh's Object Modeling Technique. Prof. Kim has built it on a SPARC, but it should build on most UNIX systems with X11-R5, Motif-1.2 and a "reasonable" C++ compiler. Bridgepoint (see http://www.cs.queensu.ca/Software- Engineering/blurb/bridgepoint.html) by Objective Spectrum, Inc. (see vendor list). Set of CASE tools for Shlaer-Mellor OOAD (from analysis to code generation). Significantly reduced fees are possible for educational institutions. -- "Yo' ideas need to be thinked befo' they are say'd" - Ian Lamb, age 3.5 http://www.cs.queensu.ca/~dalamb/ qucis->cs to reply (it's a long story...)
|
|
04-18-2004, 05:15 AM
|
|||
|
|||
|
Comp.software-eng FAQ (Part 4): CASE tool vendors
Last-Modified: 6 Apr 2003 Archive-name: software-eng/part4 URL: http://www.cs.queensu.ca/FAQs/SE/vendor.html Version: vendor,v 2.75 2003/03/26 14:21:09 dalamb Exp dalamb This is a list of contact information for CASE tool vendors, maintained at the Software Technology Laboratory, Department of Computing and Information Science, Queen's University. It was originally compiled by Scott Marcus and Theo Heavey, formerly of the CASE Research group, Dept. of Computer Science, Florida Atlantic University; under the Florida Industry High Technology Council, and funded in part by the U.S. National Science Foundation. After they lost their funding for this list in 1991, the only way we've been able to keep it up to date is if people volunteer to tell us what needs to change. Please e-mail corrections to dalamb@spamcop.net. This information is available through the World-Wide Web as http://www.cs.queensu.ca/Software-En...ng/vendor.html +1 Software Engineering (see http://www.plus-one.com) +1Base (programming environment; see http://www.plus- one.com/+1Base_fact_sheet.html), +1CM (configuration management; see http://www.plus-one.com/+1CM_fact_sheet.html), +1CR (problem tracking; see http://www.plus-one.com/+1CR_fact_sheet.html), +1DataTree (data modeling; see http://www.plus-one.com/+1DataTree_fact_sheet.html), +1Reports (documentation generator; see http://www.plus- one.com/+1Reports_fact_sheet.html), +1Reuse (reuse library toolset; see http://www.plus-one.com/+1Reuse_fact_sheet.html), +1Test (testing; see http://www.plus-one.com/+1Test_fact_sheet.html), +1ReverseC (reverse engineering/maintenance; see http://www.plus- one.com/+1ReverseC_fact_sheet.html), +1ReverseFORTRAN (reverse engineering/maintenance; see http://www.plus- one.com/+1ReverseFORTRAN.html), +1ReversePascal (reverse engineering/maintenance; see http://www.plus- one.com/+1ReversePascal_fact_sheet.html), Metrics4C (metrics; see http://www.plus-one.com/Metrics4C_fact_sheet.html), Metrics4FORTRAN (metrics; see http://www.plus-one.com/Metrics4FORT...ct_sheet.html), Metrics4Pascal (metrics; see http://www.plus- one.com/Metrics4Pascal_fact_sheet.html), Metrics4Project (metrics; see http://www.plus-one.com/Metrics4Project_fact_sheet.html) 2510-G Las Posas Road, Suite 438; Camarillo; California; 93011; USA; 805-389-1778; Call Us; info@plus-one.com. 3SL (see http://www.threesl.com/) Cradle (requirements analysis, requirements engineering, requirements tracing, reverse engineering, Ada, C, C++, maintenance, analysis, design, automated documentation, business modeling, business process reengineering, code generation, change management, client/server, Coad/Yourdan, UML, configuration management, data and process modeling, database design, DDL, design documentation, diagramming, flowcharting, documentation generator, functional analysis, information modeling, issue tracking, multi-database development, object oriented software engineering, object oriented analysis, object oriented analysis & design, object oriented modeling, process management, process modeling, real time, repository, structured analysis, structured design, systems analysis, systems engineering, technical documentation generation, upper CASE, Yourdon, YSM) Craven House, Michaelson Road; Barrow-in-Furness; Cumbria; LA14 2RJ; UK; +44 (0) 1229 838867; +44 (0) 1229 870096; sales@threesl.com Accenture (see http://www.accenture.com/) FOUNDATION (cooperative processing) 33 West Monroe St.; Chicago, IL 60603 69 West Washington; Chicago, IL 60602; 312-580-0069; 312-580-0033; 312-507-5161 Formerly Andersen Consulting. ACTL Systems Ltd. (see http://www.actl.co.il/) AbyS (object oriented, simulation, executable specification) POP 8129; 91081 Jerusalem; Israel; voice +972-2-5376459; FAX +972-2-5370425; info@actl.co.il ADPAC Corp. (see http://www.adpac.com/) ADPAC CASE Tools 425 Market St., 4th Floor, San Francisco, CA 94105; 415-777-5400 Advanced Concepts Center (see http://www.lmco.com/acc/) Lockheed Martin; 640 Freedom Business Center; King of Prussia, PA 19406; 1-800-438-7246; Fax: (610) 992-6499 Advanced Logical Software Anatool 9903 Santa Monica Blvd., suite 108; Beverly Hills, CA 90212; 213-653-5786 Advanced Software Automation Sold intellectual property rights to Hindsight tool in 1995 to IntegriSoft Inc.. 3130A Coronado Dr.; Santa Clara, CA 95054; Tel: 800-4-ASAINC; 800-427-2462; Fax: 408-492-1669 Advanced Software Technologies, Inc. (see http://www.advancedsw.com/) GDPro (analysis, design, C++, code generation, UML, documentation generator, object oriented analysis & design, object oriented modeling, object oriented development) 7851 South Elati St., Suite 102; Littleton; CO; 80120; USA; Tel. 800-811-2784; 303-730-7981; FAX: 303-730-7983; sales@advancedsw.com Advanced System Technologies Inc. Renamed to AST Engineering Services, Inc. in January 1997. Advanced Technology International, Inc. SuperCase (back-end, RE/M) Corporate HQ: 1501 Broadway, Suite 1314; New York, NY 10036; (212) 826-8855; fax to developers in Tel Aviv: +972-3-499990 West Coast Office: 8950 Villa La Jolla Drive, Suite 1200; La Jolla, CA 92037; Tel: (619) 453-3050 AGPW, Inc. (see http://www.agpw.com/) Infostructor (interactive education in data modeling) P.O. Box 11784; St. Louis, Missouri; 63105; USA; 314-361-5224; 314-361-5986; warren@agpw.com Allen Systems Group, Inc. (see http://www.asg.com/) Vista (code visualization, analysis, documentation generator, reverse engineering/maintenance); MethodManager (repository, analysis, data management, generation of copybooks and database DDL/SQL); DataManager/ControlManager (repository, analysis, data management, generation of copybooks and database DDL/SQL); ManagerView (analysis, component relationship design); Web Enabler (thin client GUI, app generation from mainframe repository) World headquarters: 1333 3rd Ave South; Naples, FL 34103; 800-932-5536; 941-435-2200 AGS Management Systems, Inc. Multi/CAM (front end) 880 First Ave.; King of Prussia, PA 19406; 215-265-1550 American Management Systems, Inc. Life Cycle Productivity System (front end, back-end) 1777 North Kent St.; Arlington, VA 22209; 703-841-6060 Aonix (see http://www.aonix.com) Software through Pictures (front end; now a family of products with names beginning StP/); StP/ACD (transformation, code generation, automation, design patterns,client/server development); StP/BPR (business process reengineering); StP/Booch (object oriented analysis & design); StP/ClassCapture (reverse engineering, C++, Smalltalk); StP/IM (information modeling); StP/OMT (object oriented analysis & design); StP/RevC (C, reverse engineering); StP/SE (structured analysis & design); StP/T (test case generator); StP/UML (object oriented software engineering, analysis, design, object oriented CASE tool, object oriented modeling, UML, Java modeling, full life-cycle,C++,Java); StP/Validator (testing); SELECT Enterprise (client/server development); SELECT SE Aonix Corporate: 5040 Shoreham Place; San Diego, CA 92122; Phone - (619) 457-2700; Fax - (619 824-0212; info@aonix.com. Aonix for Europe South: Batiment B; 66-68 Avenue Pierre Brossolette; 92247 MALAKOFF Cedex; France; Tel: +33 1 41 48 10 00; Fax: +33 1 41 48 10 12 Aonix GmbH: Stolberger Str. 200; D-50933 Köln; +49.(0).221.949.979.0 (switchboard); +49.(0).221.949.979.14 (direct); +49.(0).221.949.979.99 (fax); E-mail: For Software through pictures stp-info@aonix.de; For Select: select- info@aonix.de or infosbs@aonix.co.uk. Applied Business Technology Corp. Project Workbench 361 Broadway; New York, NY 10013; 212-219-8945 Applied Data Research, Inc. Purchased by Ameritech in 1986 and subsequently acquired by Computer Associates International, Inc. in 1988. Status of DEPICTOR front end unknown. Applied Dynamics International (ADI) (see http://www.adi.com/) BEACON (embedded software development) 3800 Stone School Road; Ann Arbor, MI 48108-2499 USA; Tel. (313) 973-1300; FAX: (313) 668-0012; adinfo@adi.com APPX Software, Inc. (see http://www.appx.com/) APPX (4th generation, rapid application development) 11363 San Jose Blvd., Suite 301, Jacksonville FL 32223; Tel. 800-879-2779; info@appx.com ARTIS Software Corporation (see http://www.artis-software.com/) Artifex (queuing networks engineering environments) 260 California Street, 9th floor; San Francisco, CA 94111; USA; Ph. +1 (415) 387 5846 Fax +1 (415) 387 5858; info@artis-software.com. ARTiSAN Software Tools (see http://www.artisansw.com/) ARTiSAN Real-time Studio (real time, object oriented, embedded, UML) Stamford House; Regent Street; Cheltenham; GL50 1HN; United Kingdom; +44 1242 229 300; +44 1242 229 300; info@artisansw.com. Two Lincoln Center; 10220 SW Greenburg Rd; Portland; OR 97223; USA; +1-503-245-6200; +1-503-244-1443; info.us@artisansw.com Artiso Corp (see http://www.visualcase.com/) Visual Case (systems analysis, business modeling, database design, systems engineering, SQL, UML) 37 Jackson Ave., Toronto ON; M8X 2J5 Phone: 416-231-6911; info@visualcase.com Ascent Logic Corporation RDD-100 (systems engineering, requirements analysis) 180 Rose Orchard Way, Suite 200; San Jose, CA 95134; phone: 408-943-0630; FAX: 408-943-0705 AST Engineering Services, Inc. (see http://www.astes.com/) QASE (information systems engineering environment) 12200 E. Briarwood Ave., Suite 260; Englewood, Colorado 80112; Fax: (303) 790-2816; Tel: (303) 790-4242; info@advsystech.com ASYST Technologies, Inc. The Developer One Naperville Plaza; Naperville, IL 60540 ATA, Inc. Purchased by Telelogic AB in 2000. Atria Software Merged with Pure to form PureAtria, which was bought by Rational Software Corporation. Attar Software Limited (see http://www.attar.com/) XpertGen (C, code generation, knowledge based systemss) Newlands Road, Leigh, Lancashire WN7 4HN, England; Tel:44 (0)1942 608844; Fax: 44 (0)1942 601991; info@attar.co.uk Automation Sciences Corporation (see http://www.autosci.com) Pro-Analyzer (Documentation automation; for Delphi and Pascal) PO Box 28812; Spokane, WA 99228-8812 USA; (509) 467-6805; FAX: (509) 468-2019 B-Core(UK) Ltd. (see http://www.b-core.com/) B-Toolkit (B-Method: complete tool support) Oxford Science Park, Oxford OX4 4GA, UK; Tel: +44 1865 784520; Fax: +44 1865 784518; B@b-core.com Bachman Information Systems Merged with Cadre Technlogies in July 1996 to form Cayenne Software; subsequently acquired by Sterling Software in 1998. BAeSEMA Limited Now part of the Software Tools Group of British Aerospace. BDQ Business Solutions (see http://www.bdq.com/) SoftTest (requirements based testing); VisionSoft Suite (multi-platform, coverage, runtime error checking, project statistics); VisionSoft DataVision (High Performance Portable Embedded database) 19 Woodend Drive, Ascot, Berkshire SL5 9BD, England; +44 1344 292230; Fax: +44 1344 873679; sales@bdq.com; rodmelby@csys.win-uk.net Bell-Northern Research ObjecTime now supplied through ObjecTime Ltd. Bellcore (see http://www.bellcore.com) MYNAH (business flow tester; see http://www.bellcore.com/ADAPTX/mynahbft.html); xSuds (metrics, program analysis, C, C++, code visualization; see http://xsuds.bellcore.com/what.html); xATAC (test coverage, C, C++; see http://xsuds.bellcore.com/flyer/xatacfly.html); xVue (program understanding, feature identification, C, C++; see http://xsuds.bellcore.com/flyer/xvuefly.html); xSlice (debugging, program slicing, C, C++; see http://xsuds.bellcore.com/flyer/xslicefly.html); xProf (program profiling, C, C++; see http://xsuds.bellcore.com/flyer/xproffly.html) 8 Corporate Place, Room 3A184 (IDS); Piscataway, NJ 08854 USA; phone: 800-521-2673; 908-699-5800; fax: 908-336-2559; web- order@ctt.bellcore.com Bender and Associates (see http://www.softtest.com/) SoftTest (requirements based testing) PO Box 849, Larkspur, CA 94977, USA; (415) 924 9196; Fax: (415) 924 3020; DSD@SoftTest.com Berard Software Engineering Berard Object and Class Specifier (BOCS) 902 Wind River Lane, Suite 203; Gaitherburg, Maryland 20878; 301-417-9884; Fax: (301) 417 0021; info@bse.com Bergson Software Tools B.V. (see http://www.bergson.nl/) Reseller for ProMod-Plus (real time CASE for structured analysis & design); AxiomSys (real time CASE for structured analysis & design) Paradigm Plus (real time object oriented analysis & design) Bomansplaats 4; Eindhoven;; 5611 NT; Netherlands; +31(0)40-2130500; +31-(0)40-2130454; tools@bergson.nl. Bezant Limited (see http://www.bezant-ot.com) SOMATiK (object oriented design) 6 St. Mary's Street; Wallingford; Oxfordshire OX10 0EL; UK; Tel: +44 (0)1491 826 005; Fax: +44 (0)1491 825 687; info@bezant-ot.com Bluestone (see http://www.bluestone.com/) UIM/X (GUI development); db-UIM/X (GUI development, database applications) 1000 Briggs Road; Mt. Laurel, NJ 08054; Phone: (609)727-4600; Fax: (609)778-8125; info@bluestone.com Borland, Inc. (see http://www.borland.com/) Together ControlCenter (UML, refactoring, reverse engineering, metrics; see http://www.togethersoft.com/products...nter/index.jsp) 100 Enterprise Way; Scotts Valley, CA 95066-3249; USA; Ph: (831) 431-1000; Bridgewater Consultants, Inc (see http://www.bridgewater.com) BW*Wizard (Java, code generation) 14168 Poway Road #201; Poway; CA; 92064; USA; 858-486-5755; 858-486-5757; info@bridgewater.com. British Aerospace Ltd. Software Tools Group (see http://www.lifespan.co.uk/stg/home.htm) Includes software previously available from BAeSEMA Limited. Principia (front end, repository; see http://www.principia.co.uk/); Principia/SSADM (front end, SSADM, analysis, design); Principia/RAD (front end prototyping with Visual Basic); Principia/PRINCE (project management); Advanced Development Dictionary (ADD) (CA-Ingres database administration, repository; see http://www.lifespan.co.uk/stg/ADD.htm); Lifespan (configuration management; see http://www.lifespan.co.uk/) Software Tools Group; BAE SYSTEMS; Apex Tower; 7 High Street; New Malden; Surrey KT3 4LH; United Kingdom; Phone: +44 (0)208 942 9661; FAX: +44 (0)208 949 6536; STG@bae.co.uk Bullseye Testing Technology (see http://www.bullseye.com/) C-Cover (test coverage, measurement) PO BOX 3428; Redmond WA 98073-3428 info@bullseye.com Cadre Technologies, Inc Merged with Bachman Information Systems in July 1996 to form Cayenne Software; subsequently acquired by Sterling Software in 1998. The CADWARE Group, Ltd SYLVA Series (front end) CASE Associates Nederland b.v. (see http://www.case-associates.nl/) MetaSuite (data warehousing, data conversion); Reseller for COOL:Jex (object oriented development) P.O.box 68; Delft; Zuid-Holland; 2600 AB; The Netherlands; +31 15 215 0070; +31 15 212 0267; info@case-associates.nl. CANAM Software Labs, Inc. (see http://www.canamsoftware.com/) Report Generator (Advantage Gen add-on, report generation); Data Generator (Advantage Gen add-on, testing); XML Handler Generator (Advantage Gen add-on, XML generation) 90 Matheson Blvd. West, Suite 101, Mississauga, Ontario, Canada; = L5R 3R3; (905) 712-3840; officemanager@canamsoftware.com CASE Methods Development Corp. Renamed to CMD Corporation. CaseWare, Inc. Renamed to Continuus Software Corporation. CASEwise Inc. (see http://www.casewise.com/) Corporate Modeler consisting of: Central Repository, Repository Explorer, Hierarchy Modeler, Process Dynamics Modeler, Generic Modeler, Data Flow Modeler, Entity Modeler, Matrix Manager, Coporate Publisher; E2 Modeler (business modeling); ERP Modeler (SAP R/3) CASEwise Inc.: Reservoir Place, 1601 Trapelo Road, Waltham, MA 02451, USA, Tel: +1 781 895 9900, Fax: +1 781 895 9914 CASEwise Ltd.: Station House, 9-13 Swiss Terrace, London, NW6 4RR, UK, Tel: +44 (0) 20 7722 4000, Fax: +44 (0) 20 7722 4004 sales@casewise.co.uk CASEWorks, Inc. CASE:PM 1 Dunwoody Park, Suite 130; Atlanta, GA 30338; FAX: 404-399-6236 The Catalyst Group PATHVU Series (RE/M) Peat Marwick Main & Co.; 303 East Wacker Dr.; Chicago, IL 60601 312-938-5352 CAST Software Inc. (see http://www.castsoftware.com/) Cast Application Mining Suite (application analysis; see http://www.castsoftware.com/Products...S/Index.html); CAST SQL Builder (SQL development; see http://www.castsoftware.com/Products...SQbuild.html); CAST Release Builder (script release management; see http://www.castsoftware.com/Products...e/SQbuild.html) 735 Montgomery Street; San Francisco; CA 94131; USA; (415) 296-1300; (415) 296-1313#; sales@castsoftware.com CARDtools Systems Corp. (see http://www.cardtools.com/) CARDtools (real time) 101 Metro Drive, Suite 250; San Jose, California 95110-1314; Phone 408-894-9500; FAX 408-894-9600; info@cardtools.com Catalyst Software Ltd (see http://www.cse.dcu.ie/catalyst) Juggler (project management; see http://www.cse.dcu.ie/catalyst/juggler) 165 Howth Road, Dublin 3, Ireland. Tel: +353-1-833-0881; Fax: +353-1-833-0882; sales@catalyst.ie Cayenne Software Acquired by Sterling Software in 1998. CGI Systems, Inc. (see http://www.cgisystems.com/) Pacbase (repository, code generation, full life-cycle, I-CASE, metamodeling; see http://www.software.ibm.com/ad/vapacbase); PacDesign (analysis, design, business modeling, Yourdon, SSADM, OMT, YSM, Merise); VisualAge Pacbase (client/server development); 301 Lindenwood Drive Suite 215, Malvern, PA 19355. Tel (610) 993-8082 Fax: (610) 993-0576 CHARONWARE s.r.o. (see http://www.casestudio.com) CASE Studio 2 (data modeling, reverse engineering, database design, DB2, design, ER, flow diagram editor, Oracle, version management, visual data modeling, code generation, SQL) 14 Perunova; Ostrava; 72000; Czech Republic; info@casestudio.com. Chen & Associates (see http://www.peterchen.com/) ER-Designer (ERD) 4884 Constitution Ave, Ste 1E; Baton Rouge, LA 70808; 504-928-5765 Cincom Systems, Inc. (see http://www.cincom.com/) SUPRA (relational database management system); MANTIS (fourth-generation application development language); TOTAL FrameWork (object oriented development environment for distributed business applications) 55 Merchant St., Cincinnati, Ohio 45246. 1-800-2CINCOM. info@cincom.com Cinderella (see http://www.cinderella.dk/) Cinderella SDL (object oriented analysis & design, SDL; for Windows 9x/NT)) 000 Dalgas Have 30 4; Frederiksberg; -; 2000 F; Denmark; -; +45 38 11 12 80; info@cinderella.dk CIP System AG (see http://www.ciptool.ch) CIP Tool (real time modelling) 000 Technoparkstr. 1; Zurich; CH-8005; Switzerland; +41 445 35 90; +41 445 35 91; info@ciptool.ch. CMD Corporation (see http://www.cmdcorp.com/) CASE/FRAMEWORK--METHODOLOGY, CASE/FRAMEWORK--SYNERGY (information engineering) 4835 Lyndon B Johnson; Suite #650; Dallas, TX 75244-6064; (972)503-0500 CodeME s.a.r.l. (see http://www.codeme.com/) CMZ (configuration management; see http://www.codeme.com/cmz/) 14 Rue de l'Eglise, F-01630 St. Genis-Pouilly, France; +33 50420914; FAX +33 50420914; info@codeme.com Coding Factory CoFac (COBOL, code generation) 100 Netro Park South; Laurence Harbor, NJ 08878; 908-290-0090 Cognos PowerCASE 67 S. Bedford St.; Burlington, Mass. 01803; 617-229-6600 Computer Associates International, Inc. (see http://www.cai.com/) Advantage Gen for Enterprise Servers (formerly COOL:Gen, formerly IEF/Composer; see http://www3.ca.com/Solutions/Product.asp?ID=256); AllFusion Component Modeler (object oriented analysis & design, reverse engineering, metaCASE; formerly Paradigm Plus; see http://www3.cai.com/Solutions/Product.asp?ID=1003); AllFusion Harvest Change Manager (configuration management, problemtracking, process management; formerly CCC/Harvest; see http://www3.ca.com/Solutions/Product.asp?ID=1630); AllFusion ERwin Data Modeler (data modeling, client/server applications; formerly ERwin; see http://www3.ca.com/Solutions/Product.asp?ID=260); AllFusion Process Modeler (business process reengineering; formerly BPwin; see http://www3.ca.com/Solutions/Product.asp?ID=254) World Headquarters: One Computer Associates Plaza; Islandia, NY 11788-7000; 1-631-DIAL CAI (1-631-342-5224); Fax 1-631-DIAL FAX (1-631-342-5329); cainfo@cai.com See full product list (at http://www3.ca.com/Solutions/ProductsAZ.asp). Acquired Platinum Technology in March, 2000. Acquired Sterling Software in April, 2000. Acquired Pansophic Systems Inc. in 1991. Acquired Cullinet Software Inc. in or before 1990. Computer Data Systems, Inc. (see http://www.cdsihq.com/) Scan/COBOL; SuperStructure 1 Curie Court; Rockville, MD 20850; 301-921-7000 Computer Sciences Corp Design Generator (front end) 3610 Fairview Park Dr; Falls Church, VA 22042; 703-876-1000 Computer Systems for Business International Eastern Europe Ltd. (CSBI EE) Reseller for CASE/4/0 (business process reengineering, system analysis, design, implementation, structured analysis; from microTOOL GmbH), objectIF (Coad/Yourdan, analysis,design,implementation, object oriented methods; from microTOOL GmbH); PROGRESS products (from Progress Software Corp.) Pobedy sqr., 2. St.-Petersburg, 196143, Russia; Fax: +7 (812) 293-3513; Tel: +7 (812) 293-2762, 291-8122, 293-0521, 293-0544. Compuware Corporation (see http://www.compuware.com) CATI tools (Abend-AID, CICS Abend-AID, CICS RADAR, File-AID family, TransRELATE, PLAYBACK, File PLAYBACK, SIMULCAST, dBUG-AID, XPEDITER, NAVIGATOR) 31440 Northwestern Highway; Farmington Hills, Michigan 48018-5550 Configuration Management, Inc. (see http://www.softwareconfiguration.com/) Professional services supporting Clearcase from Rational, DDTS from Rational, Razor from Tower, SABLIME from Lucent, IPD from Sherpa. 140 Broad Stereet, Red Bank, NJ 07701; (732)450-1100 info@softwareconfiguration.com Confluent, Inc. Bought by eTrade in September 1999; their former website is no longer operational. Their Visual Thought tool is now freeware, and available through private websites, e.g.: Visual Thought (diagramming and flowcharting; see http://tersesystems.com/vt14) Continuus Software Corporation Acquired by Telelogic AB in 2000. Cortex Corp. CorVision, Application Factory (front end, back-end, RE/M) 138 Technology Dr.; Waltham, MA 02154 100 Fifth Avenue; Waltham, MA 02154-9863; 617-894-7000 Cost Xpert Group Inc. (see http://www.costxpert.com) Cost Xpert (cost estimation) 2990 Jamacha Rd Suite 250; Rancho San Diego, CA 92019; PH:619.670.6168; FAX:619.670.3230; info@costxpert.com Cullinet Software, Inc. Acquired by Computer Associates in or before 1990. D. Appleton Company IDEF/Leverage 1334 Park View Ave., Suite 220; Manhattan Beach, CA 90266 DataFocus Incorporated (see http://www.datafocus.com/) NuTCRACKER (porting Unix programs to Windows NT) 12450 Fair Lakes Circle, Suite 400; Fairfax, VA 22033-3831, USA; (703) 631-6770; (703) 818 1532 Fax; Datanamic (see http://www.datanamic.com/) DeZign for databases (visual data modeling; see http://www.datanamic.com/dezign/index.html); ImportER Scripts (reverse engineering, databases; see http://www.datanamic.com/importerscripts/index.html) Guido Gezellestraat 18; 2394 TV Hazerswoude; The Netherlands; phone: +32 71 3410483; fax: +32 71 3410484; info@datanamic.com. db Logic, Inc. (see http://www.dblogic.com/) RoboCASE (database design, flowcharting, reverse engineering) 35 Wellington Crescent; Spruce Grove, Alberta; T7X 1K4; Canada; 780-962-4800; sales@dblogic.com Deft Inc. Deft Acquired in 1991 by Sybase. Deft is no longer sold, but is supported for customers that already have the product. Contact consult_deft@sybase.com. Deloitte & Touche Consulting Group (see http://www.dttus.com) 4Front (structured analysis; see http://www.dttus.com/dttus/aboutf/mc...t/4front01.htm) 1430 Carillon; 227 W. Trade St.; Charlotte, NC; 28202-1675; USA; (704) 372-3560; (704) 331-1631; chaynes@dttus.com Digital Equipment Corp. (see http://www.digital.com/) DEC FUSE; DECset (see index at http://www.digital.com/info/key-case-tools- index.html) Digital Interactive; 1-800-DIGITAL (1-800-344-4825); See contacts list at http://www.digital.com/info/misc/contacts.txt.html Digital Insight (see http://www.csn.net/digins/) Robochart (flow diagram editor; see http://www.csn.net/digins/prodinfo.html) P.O. Box 533; Simi Valley, CA 93062-0533; USA; phone: (805) 583-3627; fax: (805) 583-3809; rc-sales@digins.com Digital Tools Inc. AutoPlan tool acquired by Tufan, Inc.. Domain Objects (see http://www.domainobjects.com/) Domain Objects (intelligent object orientedA/RD modeling, reverse engineering: for C/C++) 615 Leopard St. Suite 736, Corpus Christi, TX 78476; Phone: 361-882-9232; Toll Free: 1-800-793-1066; Fax: 361- 883-2499; info@domainobjects.com Dragonfly Automation Software (see http://www.dragonflydas.com/) Automation ActiveX Component Package (ActiveX) Unit 131, 1560 Bloor Street E; Mississauga; Ontario; L4X 1R8; Canada; Cell: 416-522-7412; Phone:905-624-3399; Fax: 905-624-3117 E2S (see http://www.e2s.be/) HAT (HOORA Analysis Tool) (UML; see http://www.hoora.org/hoora_analysis_tool.htm) E2S nv; Technologiepark 5; B-9052 Zwijnaarde; Belgium; Tel: +32 9 2210383; Fax: +32 9 2203191; info@hoora.org Eastern Systems Inc. (see http://www.easternsystems.com/) TestPlan (test management; see http://www.easternsystems.com/products/testplan.html); TestBed (static/dynamic analysis test toolset; see http://www.easternsystems.com/products/testbed.html); TestDesigner (testing; see http://www.easternsystems.com/produc...esigner.html); TestWeb (benchmarking, client/server, testing); SQA Suite (client/server, testing; see http://www.easternsystems.com/products/sqasuite.html) P.O. Box 1087; Westboro; MA; 01581; 508-366-3223; Fax 508-366-1520; rpatel@easternsystems.com ECS Associates SQL-Link-Plus 3812 Sepulveda Blvd.; Torrance, CA 90505; 213-378-9260 Elixir Technology Pte Ltd (see http://www.elixir.com.sg/) LOREx2 for Java (object oriented analysis & design; see http://www.elixir.com.sg/); Elixir IDE (Java development; see http://www.elixir.com.sg/) 000 20/21B Circular Road; 049376; Singapore; +65 532 4300; +65 532 4255; info@elixir.com.sg EPM Technology (see http://www.epmtech.jotne.com/) EXPRESS Data Manager (data exchange, data sharing) Grenseveien 107, N-0663 Oslo Norway, +47-22649065; fax+47-22649305; info@epm-consult.no Eslog Genie logiciel (see http://www.eslog.com/) Andromede (configuration management) 000 2 bis burospace; Bičvres; 91; 91571; Bičvres Cedex; France; Tel: (33-1) 69-85-51-51; Fax: (33-1) 69-85-50-18; eslog@club-internet.com. Esterel Studio (see http://www.esterel-technologies.com) SCADE (safety-critical systems) Headquarters: parc Euclide, 8 rue Blaise Pascal, 78990 Elancourt, France Phone: +33 1 30 68 61 60; Fax: +33 1 30 68 61 61 North America: 800 El Camino Real, Suite 180, Mountain View, CA, 94040 United States Phone: 1 650 903 2207; Fax: 1 650 903 2212 Central Europe Office: Otto Hahn Str. 13B, D-85521 Ottobrunn-Remerling, Munich, Germany Phone: +49 89 608 755 37 Fax: +49 89 608 755 99 Northern Europe Office: Venture House, Arlington Square, Downshire Way, Bracknell, Berkshire, RG12 1WA, UK, Phone: +44 1344 742 818; Fax: +44 1344 742 918 EVB Software Engineering, Inc. Paradigm Plus / EVB Edition (OOAD (Unix and DOS)); HeragrapH (Ada, 2D/3D Graphics, GUI development; Unix/X windows and DOS); GRACE (reusable Ada software components); RLT (reuse library toolset (Unix and DOS)); Ada, object oriented Development and Software Engineering Training; 5303 Spectrum Drive,; Frederick, MD 21701; VOICE 301-695-6960 FAX 301-695-7734; info@evb.com EventHelix.com Inc. (see http://www.EventHelix.com/) EventStudio 1.0 (embedded real time systems; see http://www.EventHelix.com/EventStudio/) A CASE tool for use case, sequence diagram and message sequence chart modeling in embedded real-time systems. 18315 Lost Knife Circle, #103; Montgomery Village, MD 20886; USA; Voice phone: 301-990-3877; deepa@eventhelix.com. Evergreen Software Tools (see http://www.esti.com/) Merged with Visible Systems Corporation in May, 1997. Excel Software (see http://www.excelsoftware.com/) MacA&D (multi-methodology, Macintosh); WinA&D (multi-methodology, Windows 95/NT); QuickCRC (object oriented design CRC Cards, Macintosh, Windows 95/NT) P.O. Box 1414, Marshalltown, IA 50158 USA; Ph. 505-771-3719; Fax 505-771-3718; info@excelsoftware.com Forschungszentrum Informatik (FZI) (see http://www.fzi.de) STONE Haid-und-Neu-Str. 10-14; D-76131 Karlsruhe, Germany; +49-721-9654-731 Generic Logic, Inc. (see http://www.genlogic.com) Glg Toolkit (animation and simulation of mission-critical systems, C++, Java, prototyping, rapid application development, Motif widgets, 2D/3D charting and graphing); Glg ActiveX Control (charting and graphing, ActiveX); Glg Toolkit for Java (Java development, charting and graphing beans) P.O. Box 35606; Brighton; MA; 02135-0006; USA; (617)254-4153; (617)254-2746; glg@genlogic.com. Genitor Corporation (see http://www.genitor.com) Acquired by Starbase Corporation June 12, 2000. Gillani, Inc. (see http://www.gillani.com/) FourGen CASE Tools (rapid application development, Informix 4GL); FourGen Menu's (Informix 4GL) FourGen Screen Generator (rapid application development, Informix 4GL) FourGen Report Generator (rapid application development, Informix 4GL) FourGen iDesktop (rapid application development, GUI development, Informix 4GL) 833 East Arapaho Road, Suite 102; Richardson; Texas; 75081; USA; (972) 918-0400; (972) 918-0659; sales@gillani.com. Goda Software, Inc. (see http://www.analysttool.com) Analyst Pro (requirements analysis, requirements based testing, requirements engineering, requirements tracing) info@analysttool.com GOOFEE Systems Pty Ltd (see http://www.goofee.com/) GOOFEE Diagrammer (embedded real time systems) admin@goofee.com GrammaTech, Inc. (see http://www.grammatech.com) CodeSurfer (Code understanding; see http://www.grammatech.com/products/codesurfer/); Ada-Assured (Ada, LSE, automatic style compliance; see http://www.grammatech.com/products/aa/); Ada-Utilities (batch code analysis, audit, transformation, prettyprinting; see http://www.grammatech.com/products/au/); Synthesizer Generator (language-sensitive editor development system; see http://www.grammatech.com/products/sg/); 317 North Aurora Street; Ithaca; 14850; USA; (607) 273-7340; sales@grammatech.com. Headway Software Inc. (see http://www.headway-software.com/) RoZeLink (formal modeling) Dunmore East, Co. Waterford, Ireland; Voice: +353 51 383090; Fax: +353 51 383958; chrisc@computer.org Heraut Automatisering (see http://www.heraut.demon.nl/) Dezign for databases (database design) 000 van Faukenbergestraat 8; Voorburg; Z-H; 2274RZ; The Netherlands; 070-3853488; 070-3853810; info@heraut.demon.nl Hewlett-Packard (see http://www.hp.com/) Distributed Smalltalk (see http://www.ses.hp.com/products/dst/main.html); SoftBench (SoftBench C/C++, SoftBench COBOL) (software development environment; see http://www.dmo.hp.com/sesd/products/main.html); SoftBench Configuration Managment (configuration management; see http://www.dmo.hp.com/sesd/products/softcm/main.html); UIM/X (GUI development; see http://www.dmo.hp.com/sesd/products/uimx/main.html) 3404 E. Harmony Rd, MS 81; Ft. Collins, CO 80525; Distributed Smalltalk contact: tel: (408) 447-4722; dst@sde.hp.com SoftBench contact: tel: (800) 742-6795. Address: 9550 Skillman, LB 125; Dallas, TX 75243 USA; Phone: 214.343.8525 Fax: 214.343.2457; info@hyperception.com I-Logix Inc. (see http://www.ilogix.com/) Rhapsody (OOAD) Rhapsody in MicroC StateMate MAGNUM Three Riverside Drive, Andover, MA 01810; Tel: 508 682-2100; Toll Free: 888 8 ILOGIX; Fax: 508 682-5995; info@ilogix.com IAR Systems A/S (see http://www.visualstate.com) IAR visualSTATE (embedded software development; UML-design, test and automatic C-code generation) Elkjaervej 30-32, DK-8230 Aabyhoj, Denmark; Phone: +45 8625 1111; Fax: +45 8625 1191; info@iar.dk IBM CMVC (configuration management, version control; see http://www.cs.queensu.ca/Software-En...ing/blurb/cmvc) ICONIX Software Engineering Inc. (see http://www.biap.com/iconix/) PowerTools Series (object oriented analysis & design); Object Methodology Overview (interactive CD-Rom course) 2800 28th St, Suite 320; Santa Monica, CA 90405; 310-458-0092; FAX 310-396-3454; ICONIX@world.com Ideogramic (see http://www.ideogramic.com/) Ideogramic UML (object oriented analysis & design; see http://www.ideogramic.com/products/) Paludan Mullers Vej 82; Aarhus N; DK-8200; Denmark; +45 8739 4190; +45 8739 4001; info@ideogramic.com Igatech Systems Pty Ltd (see http://www.igatech.com) RDT (database applications, requirements management; see http://www.igatech.com/rdt/); FileCM (database applications, document management, records management, office data management; see http://www.igatech.com/filecm/); Level 3, 86 Pirie St Adelaide S.A 5000 Australia; Telephone +61 8 8232 9622; Fax +61 8 8232 9611; Imagix Corporation (see http://www.imagix.com/) Imagix 4D (reverse engineering and documentation for C/C++; see http://www.imagix.com/products/imagix4d.html); Imagix 2000 (Year 2000 analysis and assessment for C/C++; see http://www.imagix.com/products/imagix2000.html) 6025 White Oak Lane; San Luis Obispo; CA; 93401; USA; 1.805.781.6002; 1.805.781.6003; info@imagix.com Index Technology Corp. Merged with Sage Software Inc. to form Intersolv. Infologistik GmbH GRADE Modeler 4.0 (business process reengineering; see http://www.latnet.lv/LU/MII/Grade/) 000 Wagnerbreite 3; Holzkirchen; 83607; Germany; voice +49 (0) 8024 3045-0; FAX +49 (0) 8024 3045-25; 100073.2765@compuserve.com. InfoModelers, Inc. As of mid-2000, references to http://www.infomodelers.com/ were redirected to Microsoft's Visio page at http://www.microsoft.com/office/visio, suggesting that perhaps InfoModeler 3.0 has been replaced. Information Engineering Technology Ltd. (see http://www.iet.co.uk/) GuardIEn (configuration management, IEF/Composer); IRIS (IEF/Composer, report development aid); CSE-Assist (IEF/Composer; add-on for c/s encyclopaedia) The Old School House, Hurstwood Road, Otterden, Kent ME13 0BX, UK; info@iet.co.uk; FAX: +44 (0) 1622 858 649 Information Processing Ltd. (IPL) (see http://www.iplbath.com/) Cantata++ (C++, dynamic testing, test coverage, metrics; see http://www.iplbath.com/p131.htm), Cantata (C, dynamic testing, test coverage, metrics; see http://www.iplbath.com/p13.htm), AdaTEST (Ada, dynamic testing, test coverage, metrics; see |